Start Image Viewer
1. Open file to fix into main image area
2. --- Action(s) below ---
3. Save file
Straighten Image (Use PAGE Rotate if needed)
1. Select VIEW (Fit Width)
2. Select PAGE (Straighten)
3. + cursor will appear in the main image area
4. Left click (hold down) over left side of horizontal line
5. Move cursor (still holding down) to right side of horizontal line
6. Release click (when ready)
7. Confirm straight (if not OK, try again) or use Edit (Undo) to reverse
Clean Page
1. Select PAGE (Eraser)
2. Select VIEW (Best Fit / Fit Width / Zoom In / Zoom Out)
3. Move [::] cursor over area to erase in main image area
A. Click / Release to erase single area in cursor
B. Click (hold down) / Move / Release to erase expanded area in cursor
4. Select EDIT (Undo) to reverse
Annotate
1. Select ANNOTATE (Draw Line)
2. Set line thickness (if need to change from prevoius setting)
3. + Cursor will appear in main image area
4. Click (hold down) at start point / Move cursor to end point / Release
5. Use right click on line to Delete
Note: After annotate - some actions not allowed until all annotations deleted
|